Did someone try to import from 3D model to paragon category

me_hungry · 发表于 2013-8-8 17:04:31

本帖最后由 me_hungry 于 2013-8-8 06:51 PM 编辑

I have 3D catalogues in .dxf (or some other 3D format) and I would like to import it in category of Paragon. Did someone hear of such instrument?

As I understand graphics and ppoint inside categories refered to attributes. To my mind there is not so hard to convert it but its only theories..

cl890722 · 发表于 2013-8-9 15:27:03

me_hungry · 发表于 2013-8-10 03:05:25

本帖最后由 me_hungry 于 2013-8-9 09:06 PM 编辑

I know it looks impossible but people never stop to amaze us. Maybe some smart progammer will share with us some part of code..

pdms · 发表于 2013-8-11 14:13:44

本帖最后由 pdms 于 2013-8-11 02:19 PM 编辑

In DXF file the model are represented by 3D Face, so can not extract shape primitive(such as box, cylinder, cone, .etc) from the dxf file.
And the shape's dimension and position can have relation with parameters defined in the category, you can not get these information from dxf file too.
P-Point also have the same problem.

me_hungry · 发表于 2013-8-15 01:00:43

Yes, I know that they are represented as complicated figures but I may ask customer to give it likes primitive. Its beter than buy aveva license.

And the shape's dimension and position can have relation with parameters defined in the category, you can not get these information from dxf file too.
P-Point also have the same problem.

I understand that but I need it! I may abtain only graphics(firstly) in paragon and after that I will fill all relations manually (para1\para2)+import parameters table.
It is faster than do it manualy

Thanks for your answer!!

		自动登录	找回密码
密码			注册有问题进QQ群591484440